Health and Safety VR Training for Industrial Application
GWPro create digital interactive training packages in the form of VR simulators. They are created in strict compliance with current regulations, from learning techniques to simulator delivery. These standardized solutions and tailored simulators are perfect for HSE, as well as occupational learning to enhance the efficiency of training departments.
Straightforward and easy-to-understand learning process.
Every module has a maximum timeline of 30 minutes in learning mode.
One-button experience for all ages and accessible for workers who’re new to VR.
Multi-language explanations for all steps and mistakes.
Confined Space Entry
Confined Space Entry VR Training will simulate preparation to enter permit-required confined spaces. This module will teach you which warning signs should be used, how to perform atmospheric testing before entering a confined space and how to work with your colleagues to make work safer.
In this VR simulation, you will learn how to prepare to work on a switchgear, put on the necessary personal protective equipment, check work permits, prepare tools, prepare equipment and disconnect and revive the switchgear cell.
Fire Safety (Hangar)
In this VR simulation, you will have to call the fire brigade by phone, conduct evacuation according to the evacuation plan, turn on the manual fire alarm, follow the escape routes according to the signs and use a fire extinguisher in accordance with the operating rules.
Fire Safety (Office)
In this VR simulation, you will have to call the fire brigade by phone, conduct evacuation according to the evacuation plan, turn on the manual fire alarm, follow the escape routes according to the signs and use a fire extinguisher in accordance with the operating rules from within an office setting.
During this training module, the user will complete tasks from the supervisor. These include undergoing a briefing, putting on the necessary personal protective equipment, checking work permits, checking the availability of the Basics of Fire Safety certificate and a qualification certificate, analysing the gas-air environment and much more.
In this simulation, you will learn how to choose the right type of load slinging depending on the work permit task which describes: the weight of the load, the dimensions of the load and the load capacity of the slings (your choice of textile or iron). After that, you will be required to move the load to a specific location.
Lockout Tagout (LOTO)
In this VR simulation, you will learn how to physically isolate electrical and hydraulic hazardous energy in the corresponding equipment using the LOTO tools.
Work at Height
In this VR simulation, you will prepare for work at height, collect tools, climb to height with different fall protection systems, move at height with different modes and stop the unsafe behaviour of other employees.
Underground Roof Fall Hazard Assessment
This training module will take you underground to investigate the area and determine whether or not further ground support measures are necessary. You will remove hazards or communicate with co-workers if you need assistance.
Maintenance Safety (Pipes & Acids)
Learn how to prepare the tools, PPEs and safety measures for working on chemical pipelines, cooperate with colleagues, read the pipeline schematics, shut down the pipeline, lockout tagout valves, wash the pipeline and provide safety measures around future maintenance work and much more.
Truck Preparation for Driving
In this simulation, you will learn how to fully prepare for driving a truck with a load. You will identify hazards in and around the truck, check the equipment and test all necessary processes. You will also use proper tools and experience feedback through sounds, tool actions and cooperation with co-workers.
Road Accident with Dangerous Goods
In this VR simulation, you will be placed into a road accident with your truck and another car. You will learn how to properly behave in this situation, how to evaluate risks, check the equipment and communicate with your coordinator and other drivers.
Scaffolding (Wedge Scaffolding Assembly Training)
In this simulation, you will be instructed on how to build wedge scaffolding with the proper tools and parts. You will start by undertaking location preparation. Then, you will build three levels of scaffolding with the help of your co-worker. By the end of your training, you will have built a scaffolding, complete with a green tag.
Arc Flash (Flashover)
Stay safe from the Arc Flash whilst doing your job. Work in both a classroom and an industrial environment as an electrician. Take a look at the wiring diagram, choose the appropriate personal protective equipment, check the voltage, work with different meter modes, lockout tagout electrical equipment and much more.
Train to spot potential hazards and learn safety protocols from within a virtual environment. This immersive training module enables employees to learn and practise safety procedures in a safe and controlled environment, reducing the risk of accidents and injuries.
All of GWPro’s simulations are available in the following languages:
Get a Quote
Enquire now for information and pricing on RedboxVR products and solutions.